How to Reset a Samsung Washing Machine (Hard Reset & Calibration)
Step-by-step master reset procedure for all Samsung front-load and top-load washing machines to clear persistent error codes and re-calibrate drum weight sensors.
Advertisement - Reset Detail Slot
🔄 Official Reset Sequence
1
Unplug the power cord directly from the wall receptacle.
2
While unplugged, press and hold down the 'POWER' button for 15 seconds to discharge all residual voltage from the internal computer board capacitors.
3
Plug the machine back into the wall outlet.
4
Turn the washer on and run the Auto-Calibration Mode: Ensure the drum is completely empty. Press and hold the 'Temp' and 'Delay End' buttons together for 3 seconds until 'Cb' (Calibration Mode) appears on screen. Press the 'Start/Pause' button to begin. The drum will rotate clockwise and counter-clockwise for 3 minutes before beeping and turning off.
Safety Warning: Never perform calibration with clothes, water, or detergent inside the drum.
Advertisement - Reset Detail Bottom Slot