How to Reset a Consul Dryers & Tumble Dryers (Hard Reset Procedure)
Complete guide to performing a hard power reset and clearing lingering error codes on Consul dryers & tumble dryers.
Advertisement - Reset Detail Slot
🔄 Official Reset Sequence
1
Turn off the Consul unit using the Power button.
2
Disconnect the main power plug from the electrical wall receptacle (or switch off the dedicated circuit breaker in the panel).
3
While power is disconnected, press and hold down the 'Start/Pause' (or 'Power') button for 10-15 seconds to discharge residual electricity stored in the control board capacitors.
4
Wait an additional 5 minutes with the power disconnected.
5
Reconnect the power plug firmly into the wall outlet.
6
Turn the machine back on and initiate a short rinse or test cycle without items to confirm the error code is cleared.
Safety Warning: Always ensure your hands are dry before handling power cords and disconnect electricity before any physical inspection.
Advertisement - Reset Detail Bottom Slot