Samsung Dishwashers Error Code E01 - Electronic Control or Sensor Anomaly

Low Severity

Error code E01 on Samsung dishwashers indicates a electronic control or sensor anomaly detected by the internal system diagnostics.

Appliance: Samsung Dishwashers

Estimated Time: 10 minutes

Tools Required: Flashlight

⚠ Common Symptoms & Observations

The Samsung display flashes 'E01'; unit halts operation or beeps repeatedly.

🔍 Root Causes for Code E01

Temporary electrical line surge
loose wiring harness
dirty sensor contact
control board micro-relay glitch.

🔧 Step-by-Step DIY Troubleshooting & Fix Guide

Turn the Samsung machine off.

Unplug power cord from wall outlet (or trip breaker).

Wait 10 minutes to discharge all circuit board capacitors.

Plug back in, close door firmly, and select a short test cycle.

🔄 Master Reset Procedure for Samsung

Hold the Power or Start button for 5 to 10 seconds while powering the unit back on.

Technician Tip: If the error code reappears immediately after a hard reset, the control board has detected an active electrical open circuit or failed component that requires physical inspection.