Home › Washing Machines › LG Electronics › Error LE

LG Washer Error Code LE - Direct Drive Motor Locked

Medium Severity

The Hall sensor (rotor position sensor) detects that the Direct Drive motor is overloaded, jammed, or unable to rotate.

Appliance: LG Electronics Washing Machines

Estimated Time: 10 minutes

Tools Required: None for reset, 17mm socket if checking rotor

⚠ Common Symptoms & Observations

Washer stutters or jerks back and forth before shutting off; drum does not spin freely by hand; buzzing sound from motor.

🔍 Root Causes for Code LE

Severe tub overload (washing heavy blankets or bath mats)
small sock or underwire caught between inner spin basket and outer tub
cracked Hall effect sensor
loose motor rotor center bolt.

🔧 Step-by-Step DIY Troubleshooting & Fix Guide

Turn off the washer and open the door. Try spinning the metal drum by hand. If it is stiff or won't rotate, check for stuck clothes wedged in the rubber boot lip.

Reduce the load size by half.

If drum spins smoothly by hand, the issue is typically a temporary thermal overload or faulty Hall sensor.

🔄 Master Reset Procedure for LG Electronics

Master Reset: Unplug the washer from the wall outlet. Press and hold the 'START/PAUSE' button for 5 seconds to discharge the control board. Release and plug the unit back in. Start a Spin Only cycle to test.

Technician Tip: If the error code reappears immediately after a hard reset, the control board has detected an active electrical open circuit or failed component that requires physical inspection.