Home › Air Conditioners & Heat Pumps › Daikin › Error E7

Daikin Error Code E7 - Outdoor DC Fan Motor Lock

Medium Severity

The outdoor fan motor is jammed, stalled, or its Hall-effect speed feedback signal is missing, preventing proper heat exchange.

Appliance: Daikin Air Conditioners & Heat Pumps

Estimated Time: 15 minutes

Tools Required: Flashlight, gloves

⚠ Common Symptoms & Observations

Indoor unit blows ambient air without cooling; outdoor fan does not spin; compressor shuts down on thermal safety switch.

🔍 Root Causes for Code E7

Tree branches, leaves, or animal nest jamming outdoor fan blades
high wind creating backpressure
burnt DC fan motor
blown fan motor fuse on the outdoor PCB.

🔧 Step-by-Step DIY Troubleshooting & Fix Guide

Switch off the AC isolator switch outside next to the condenser.

Inspect the fan grille and remove any leaves, twigs, or debris blocking the fan.

Using a long wooden stick or screwdriver (with power OFF), gently nudge the fan blades to ensure they spin freely without scraping.

🔄 Master Reset Procedure for Daikin

Leave main isolator switch OFF for 10 minutes, then switch back ON.

Technician Tip: If the error code reappears immediately after a hard reset, the control board has detected an active electrical open circuit or failed component that requires physical inspection.